How to use the fingerprint keypad door lock

1st. To get english hold the fingerprint area until it flashes green and black

2nd. The order of color on displayed while holding is none, green, orange, red, green/black.

Initial installment

Post installation and battery placement

To begin using - you want to add the manager

This is by holding the fingerprint area (FPA) until the light is green

Then you want to input your fingerprint by placing your finger on the FPA 6 times - it will repeat “please enter again” or “input failed” until you do it 6 times.

The manager will be finished when it repeats “the input is complete”

Initial password placing

Press FPA till the light is green

It will ask you to verify the administrator - Initial installing admin needs to place their fingerprint on the FPA - it will follow by saying verification success

You then want to touch the # button all the way to the buttom end of the handle opposite of the FPA (it doesn’t show before tapping it so just tap the general area)

Then immediately put in the 6 digit code you want (could be 123456) followed by the # to confirm. It will ask you to enter it again - and then the input will be complete

Normal open mode

Hold the FPA until it display orange - then verify admin fingerprint to put it in normal open mode

The app usage

Start by downloading

Apple (app store): E-Lock OR Android (google playstore): iElock

Turn on notifications and bluetooth* (required)

The app will automatically scan for a lock or you can manually

Click the main center button for scanning

Connect bluetooth

It will then prompt you to verify & connect the fingerprint - so touch the FPA with admin print

It will then promt you to input password - plug in your password (123456)

You will then be able to lock(red display) and unlock(green display) the door on the apps main button

You will also be able to add users and get a temporary password in the footer

Theres a history log of entry in footer as well

To add Users

Press FPA till the light is green

It will ask you to verify the administrator - Initial installing admin needs to place their fingerprint on the FPA - it will follow by saying verification success

Then you want to input your fingerprint by placing your finger on the FPA 6 times - it will repeat “please enter again” or “input failed” until you do it 6 times.

The user will be added when it repeats “the input is complete”

Fingerprint Keypad Door Lock - Installation Video Guide

The first step being that you remove the previous equipment out the door using a the necessary equipment.

For old knob / handle removal refer to: https://safetynsecurities.com/apps/frequently-asked-questions